TEQ Ultimate Scale Cast Axle (Front)


With improved steering and durability, the TEQ Ultimate Scale Axles are a modern version of the Yota II axles designed as an upgrade for Axial SCX10 II and Element Enduro line of RC trucks. These scale axles are cast from a high grade aluminum alloy and come with integrated suspension link mounts that construct a single, hardened unit. Solid and maneuverable, this set features universal style XVD shafts that deliver a tighter turning radius and high strength driveline. The ring and pinion gears are a CNC machined, hypoid tooth design and are linked to a 6 bolt hardened steel locker. The C-hubs feature interlocking grooves on the front axle which enables caster customization and the front pumpkin is offset providing more ground clearance. All of this is packed into a high strength cast aluminum case with a long lasting powder-coated finish. These RC Axles will look awesome on your custom Axial SC10 II or Element Enduro.




  • Die Cast Light Weight Metal Housing
  • Hardened Steel Spool Gears
  • 5mm Axle Output Shaft
  • Full Ball Bearings
  • Powder-coated in Black
  • Width: 189.6mm / 7.46in
  • Gear Ratio: 8T/30T
  • 12mm Steel Wheel Hex
  • Weight: 6.24oz / 177g










Shown installed on Axial SCX10 II for example (Not Included)




Shown installed on Element RC Enduro Sendero RTR 1/10 Rock Crawler for example (Not Included)






Images provided by RC4WD team driver Daniel Siegl






What's Included:

  • 1x TEQ Ultimate Scale Cast Axle (Front)
  • 1x 115.8mm Link
  • 1x 63mm Link
  • 1x 66mm Bent Link
  • 1x M3 Plastic Bent Rod End
  • 1x M3 Mini Plastic Rod End
  • 4x RC4WD M3/M4 Plastic Short Rod Ends
  • 2x M3 x 10mm Set Screws
  • 4x M4 x 20mm Set Screws


Other TEQ Axles:


Replacement Hardware:


Replacement Parts:




  • Fits Axial SCX10 II
  • Fits Associated Element Enduro
  • To install on Element Enduro chassis you will need to use the stock panhard and drag link.
  • To retain a centered front axle the stock panhard link and drag link will need to the lengthened by loosening the rod ends 1-2 revolutions.
  • Please do routine maintenance.
  • Check the grease around the gears and also oil the bearings.
  • Do not over tighten screws as you can strip the holes. Use Locktite but do not use too much or you can damage the casing.


SKU Z-A0127
Barcode # 639302593455
Brand RC 4WD

More From This Category